Up and over garage doors may be particularly susceptible to drafts during the colder and windier seasons. Here are a few tips to keep yours draft-free all year long. There will be gaps around the edges of an up and over garage door, which will enable cold air to get in around the edges while the door is open.

What if I told you your garage is the least energy-efficient room in your house? When it comes to decreasing your home’s carbon footprint, making it more energy-efficient, and lowering utility costs, the garage is typically disregarded since most people think of it as a place to keep their cars, bikes, and other stuff.’

Seal Garage Door

Consider garage door seals to maintain up and over the garage door yet keep the draughts at bay. You can make your version of this by putting foam tubing on the bottom lip of your garage door, which acts as a barrier when the door is closed.

Seal Garage Door

Seal Garage Door

It’s also a good idea to acquire weather-sealing strips that you can use to seal the bottom of your garage door while it’s open to keeping out rain and snow.

  • Garage door insulation is a must.

The garage door is generally where the majority of your home’s heat escapes, so you shouldn’t be surprised. Insulation is essential since a single layer of aluminum or steel Garage Door Material efficiently conducts heat and cold outside.

Replacing an old, drafty door with a new, energy-efficient, well-insulated one. Find insulation products like bubble foil or foam board that may be put on the inside of the door to keep heat in during cold weather.

  • Second, add door seals to the doors.

You need to make sure that your garage door’s bottom seal is in good condition. It’s intended to keep out water and debris, but it may begin to show signs of wear and tear with time. Particularly with wooden garage doors, the individual seams between panels are no exception.

You can determine whether something needs to be replaced by looking at it. Request the help of one of our trained repair specialists if you’re unsure about a problem.

  • Thirdly, install weather strips.

Older garage door models may not even have weather strips around the door’s edge, which are standard on most current garage door models. Make an appointment at your local hardware shop to inquire about draught-proofing strips, which are inexpensive and straightforward to install. And while you are at it, don’t forget to take care of any internal connecting doors.

  • Next, install insulation on all surfaces, including the ceiling and walls.

Wall and ceiling insulation that saves energy shouldn’t be prohibitively expensive. Get sufficient u-value insulation and place it between the rafters correctly (assuming you have a proper garage roof).

Consider cavity wall insulation that may be pressure injected or insulated with bubble foil. You will know the difference as soon as you see it!

  • Finally, fill up any holes or crevices.

It is possible for warm air to escape and cold air to enter via cracks in the flooring, windows, and doors. Building caulk made of silicone or latex is perfect for creating an airtight, weatherproof barrier around openings in the structure.

Easy to install, cost-effective, and ideal for insulating your garage, this product is an excellent choice.

Replacing Your Garage Door: What To Consider?

You may want to consider Replacing Your Garage Door if a weatherstrip isn’t working or if your garage door is outdated and you don’t want to deal with the inconvenience of DIY.

Keeping draughts out of your garage is easy with any of these two-door styles:

  • Roller Garage Doors

As a single door is rolled into a vertical opening, roller garage doors don’t need as much area for wiggle room as other types of doors. This door has no side or bottom openings with its frame around it. Thus there are no draughts. A draught-free zone with low heat loss may be achieved by insulating the door itself.

  • Sectional Garage Doors

A draught in your garage may be eliminated with the help of sectional garage doors. Retracting vertically into your garage, like a roller door, this door glides smoothly on both sides without any gaps. The portions form a solid wall when lowered, but they split into individual pieces when raised. Thus, the door does not have a gaping hole in its bottom part.

Bottom Line

Thermal efficiency is an important consideration when it comes time to replace your garage door, regardless of the reason for your dissatisfaction with the current model. Roller and sectional garage doors are available from some of the world’s best manufacturers at Paragon Garage Doors & Locksmith LLC.

It is a locally owned and run, licensed, insured, and bonded firm that constantly receives 5-star evaluations from its customers.